Tuesday, July 7, 2026
spot_img
Home Blog Page 236

Groundbreaking Ceremony for New Aniline Production Plant

Groundbreaking Ceremony for New Aniline Production Plant

  • Strengthening the production network for MDI
  • Commissioning of the new plant planned for early 2025
  • State-of-the-art technology for greater energy efficiency and lower CO 2 emissions

Covestro broke ground today in Antwerp for a new world scale production facility for the manufacture of aniline. With the capacity expansion, the company is strengthening its European production network for the foam component MDI. For this purpose, Covestro is investing more than €300 million. The plant is scheduled to be operational – depending on the volatile economic situation – in early 2025. This will create around 40 new jobs.

The basic chemical aniline is an important starting material for many chemical products, including the rigid foam component MDI. The product is mainly used for the production of insulation materials for buildings and refrigeration equipment. Due to the global trend towards sustainability and climate neutrality, the global MDI market is expected to grow by around six percent per year in the medium term. Given the current high electricity and gas prices, especially in Europe, demand for efficient insulation is likely to further increase.

“Even in challenging times, we must not lose sight of our goals. With the expansion of our aniline production, we are addressing the further increase in demand from our customers for energy-efficient solutions for the insulation of buildings and refrigeration appliances. At the same time, by using state-of-the-art technology, we are increasing the energy efficiency of production and thereby the competitiveness of the Antwerp site,” says Dr. Klaus Schäfer, Chief Technology Officer at Covestro.

An important milestone for the site 

Dr. Georg Wagner, Covestro Site Manager in Antwerp, sees the investment as a crucial step into the future: “The groundbreaking ceremony for the expansion of our aniline production is an important moment for our site. The capacity expansion will enable us to continue to ensure the sustainable and efficient supply of our MDI network in Europe. In doing so, we will continue to draw on the attractive infrastructure and logistics at the heart of the port, from where we also have direct access to the raw materials we need. This investment further anchors us here in Antwerp and also creates sustainable jobs for the future.”

For policymakers in Antwerp, Covestro’s capacity expansion is making a positive contribution to development in the region. “Belgium is the second most important export country for chemistry and life sciences within the European Union after Germany. The sector of chemistry and life sciences is today one of the most important industries in Flanders and heavily invests in R&D and innovation. Last year alone 2.6 billion euro or more than half of all the industrial investments in innovation in Flanders were announced in this sector. Today is another milestone in this respect”, explains Jan Jambon, Minister-President of the Flanders region.

The new plant will use state-of-the-art technologies that will help to significantly increase the energy efficiency of production in Antwerp. Currently, around 20 percent of the steam required on site is covered by using process heat generated during production. The remaining steam is generated using fossil resources. With the commissioning of the new plant, the share of steam generated from process heat will double to 40 percent of local demand, and the use of fossil fuels will decline. The potential savings correspond to up to 27,000 tons of CO 2 emissions per year. The new plant thus makes an important contribution to achieving Covestro’s goal of being operationally climate-neutral by 2035.

The expansion of aniline production is part of Covestro’s global MDI strategy. The aim is to strengthen the production network for MDI in view of a further increase in demand. In Brunsbüttel, Germany, Covestro already commissioned a new plant for the production of MDI using the particularly energy-efficient AdiP technology in 2020. In Tarragona, Spain, a new chlorine production plant based on the likewise particularly energy-saving ODC technology is nearing completion.

Covestro is one of the world’s leading manufacturers of high-quality plastics and their components. With its innovative products and processes, the company contributes to greater sustainability and quality of life in many areas. Covestro supplies customers around the globe in key industries such as mobility, construction and housing, and electrical and electronics. In addition, Covestro’s polymers are used in areas such as sports and leisure, cosmetics, healthcare and in the chemical industry itself.

The company strives to be fully circular and aims to become carbon neutral by 2035 (Scope 1 and 2). In fiscal 2021, Covestro generated sales of €15.9 billion. As of the end of 2021, the company produced at 50 sites worldwide and employed around 17,900 people (converted to full-time positions).

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

Huhtamaki, Milliken Partner to Design for Circularity

Huhtamaki, Milliken Partner to Design for Circularity

Joint research yields highly recyclable, mono-material HDPE tube

Milliken & Company, a trusted expert in plastics additive and colorant technology, is partnering with Finnish flexible packaging giant Huhtamaki Group to develop a more sustainable, mono-material laminate for use in tubes targeting cosmetics, toothpaste and other personal-care applications.

The results of this joint effort, designed to create a healthier future, will be on display at the K 2022 trade fair in Dusseldorf from Oct.19-26. Milliken will display high-density polyethylene (HDPE) tubes produced using Huhtamaki laminates optimized with Milliken UltraGuard Solutions technology, at our booth (Hall 6 Booth A27). Executives from the two firms also will participate in a TechTalk presentation at the show on Tuesday morning, Oct. 25 (from 10:30-11:00 a.m.) at Milliken’s Gallery (Hall 6, Gallery 1O-05).

Huhtamaki, Milliken partner to design for circularity.

With the market’s keen focus on recycling and circularity, it is more vital than ever to find technologies that can eliminate the typical metalized (usually aluminum) layers while maintaining the necessary barrier properties, especially against water vapor and oxygen transmission needed in personal-care applications.

By improving the barrier properties of HDPE film by up to 50 percent, UltraGuard Solutions contribute to sustainability by enabling more mono-material construction of popular products such as stand-up flexible pouches and tubes and making them ultimately more recyclable. These improved barrier properties also allow for downgauging of the polyethylene (PE) film, resulting in a lighter-weight end product and a reduction in the amount of resin needed to achieve the desired result.

Huhtamaki’s work on this project fits in perfectly with its blueloop™ initiative for sustainable, flexible packaging. Huhtamaki blueloop is a product portfolio aiming to make flexible packaging circular by introducing a range of recyclable solutions with mono-material structures using polypropylene (PP), PE and paper. The blueloop program contains recyclable and sustainable laminate solutions, with dedicated criteria, to ensure the resulting mono-HDPE-laminate is fully recyclable and approved by RecyClass.

Huhtamaki, Milliken partner to design for circularity.

“The tube resulting from this joint development work is opaque with a silver shine, making it ideal for beauty product applications,” said Dr. Detlev Schulz, Senior Manager – Sustainability and Business Development for Huhtamaki’s Global Tube Laminates business. “White would work as well, offering outstanding moisture barrier and improved oxygen transmission for all who don’t need a shiny silver option.” The most likely end uses will be in 40 to 200 ml tubes.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

The Chemical Recycling Industry is at a Pivotal Point in a Volatile Market Environment

The Chemical Recycling Industry is at a Pivotal Point in a Volatile Market Environment

AMI has published its 2nd authoritative report on the global Chemical Recycling Industry. New in this edition, the report provides a comprehensive global directory of 181 chemical recyclers and their 449 sites, including headquarter and site level information on:

  • Existing and planned capacities to 2030,
  • Technologies used,
  • Types of post-use plastics processed,
  • Feedstock sources and sourcing models,
  • Operational details, and
  • Outputs of the chemical recycling process.

In a unique approach to the industry, chemical recyclers are placed within a value chain context, with the interactive report format mapping industry relationships across the value chain. This allows users to gain a clear understanding of the developing complex partnerships and interactions within the industry and across the wider petrochemical and plastics processing landscape.

Chemical recycling technologies and concepts of key importance for the industry, such as the mass balance approach, are explained, together with a discussion of the key issues of potential competition of chemical recycling with mechanical recycling, and feedstock sourcing. An overview of regional differences in waste management, collection and sorting illustrates the potential for the development of the industry in 10 global regions.

The report identifies a global chemical recycling input capacity of close to 1.2 million tonnes in 2022, excluding facilities processing post-use plastics into fuels. Europe is at present considered to be at the forefront of technological developments in chemical recycling. Over coming years, developments in North America are, however, forecast to accelerate at a faster pace.

Approaching the last quarter of 2022, the chemical recycling industry has reached a significant threshold. Following many years of developments and announcements the first commercially active facilities are operating, and a significant number of plants are scheduled to start fully commercial operations imminently and during 2023. Even larger capacities are in the pipeline and scheduled to become operational during the forecast period to 2030.

Across the industry, there appears to be the perception that the time has come to deliver on the multitude of announcements made over recent years. Supply chain partners and investors are keen to see facilities starting fully commercial operations, proving that the relevant technologies can be scaled up to operate in an efficient and financially viable manner in the long term. Evidence that they can do so is, in many cases, still outstanding. The same applies to claims relating to carbon footprints, energy efficiency, risks to human health, and environmental externalities.

A particular concern is that investments into what is a capital-intensive industry will potentially divert attention away from reducing virgin plastic production and plastic waste generation by creating a ‘lock-in effect’ to an industry and supply chain that relies on a growing stream of waste plastic material for its operations.

It is for the chemical recycling industry to show, verified by independent third-party bodies, that it can deliver on its claims and promises without creating these lock-in effects, and by operating as a complementary technology to mechanical recycling, itself an industry characterised by innovations and advancements for the processing of a growing range of post-use plastics.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

Cartes to Exhibit at Labelexpo India With Weldon Celloplast

Cartes to Exhibit at Labelexpo India With Weldon Celloplast

Cartes Italy will exhibit at Labelexpo India 2022 in hall 1 booth C9 along with its agent Weldon Celloplast Limited New Delhi.

The company’s sales staff will explain visitors the benefits of:

Digital finishing technology, Cartes Jet D-Screen (JDS), combined with its laser die-cutting and converting system for embellishing, finishing and die-cutting digitally printed labels.

The Jet D-Screen for digital finishing is conceived with cutting-edge technology, enabling variable data handling and specially designed to create labels embellished with multi-layer effects, in-register varnishing, intricate and thick tactile embossing, security applications, ultra-high precision foil printing and cast gold with fine detail.

Cartes’ renowned laser die-cutting, unique with unlimited durability, constant power and consistently perfect cutting quality, is complemented by a range of process automation solutions, such as automatic job changeover via barcode reading, automatic positioning of longitudinal cutting units and turret rewinder, which create the right combination for fully automated digital finishing.

Embellishing and ennobling labels in a single process, without plant costs and without wasting time and/or material, is now ensured by the combination of two systems Cartes Jet D-Screen (JDS) and Cartes laser technology.

The Cartes Gemini series offers fully modular solutions for digital finishing for creating metal doming, high build varnish and Braille effects (Jet D-Screen), flexographic varnishing and printing, cast and cure, semi-rotary die-cutting and laser die-cutting and converting.

The Cartes GT 360 series offers fully modular solutions for digital finishing for creating metal doming, high build varnish and Braille effects (Jet D-Screen), flexographic printing and varnishing, high productivity screen printing, hot stamping, cast gold/3D, hologram application, cut window removal, application of labels on labels, high and low embossing, flat die-cutting, semi-rotary die-cutting and laser die-cutting and converting.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

Vetaphone Corona at Labelexpo India 2022

Vetaphone Corona at Labelexpo India 2022

Surface treatment manufacturer Vetaphone will be supporting its agent Weldon Celloplast at Labelexpo India 2022 in Greater Noida on 10-13 November. The Danish company will have several of its corona units on working demonstration at the show.

Vetaphone looks forward to welcoming visitors to the exhibition and showing them the benefits of a class-leading corona system together with Weldon Celloplast Ltd. at their stand C9 Hall 1 during Labelexpo Indi at 10 – 13 November 2022,India Expo Center & Mart, Greater Noida, Delhi NCR

On stand F15/17/19 in Hall 3, India-based UV Graphics Technologies will be showing two Vetaphone VE-A 520 models on its narrow web Ultraflex flexo line, and two VE-A 460 models on its Ultraflex hybrid line, where the digital element is powered by Domino.

All Vetaphone corona treaters at Labelexpo India have the intelligent 2KW Vetaphone iCorona generators and are fitted with four ceramic electrodes in each unit.

Vetaphone has a market share exceeding 80 percent in the narrow web sector. The company’s global sales and service network ensures that users are never far from after sales service and technical support, with a ready supply of spare parts.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

Medica 2021 and Compamed 2021 Have Far Exceeded Expectations

Medica 2021 and Compamed 2021 Have Far Exceeded Expectations

Visitors and exhibitors were in good spirits throughout – personal encounters once again take centre stage

After their four-day run as an in-person event, medica and compamed have achieved extremely successful results in düsseldorf. From 15 to 18 november 2021, the world’s leading information and communication platforms for the medical technology industry and its supplier sector presented a wealth of convincing innovations as well as an accompanying programme that covered a wide range of topics (supplemented by digital offers) and did justice to their internationally prestigious position. “the atmosphere in the trade fair halls was relaxed and characterised by a sense of optimism throughout; conversations with our customers have shown that in many cases, we have exceeded expectations. People were finally able to establish new and intensify existing contacts in person,” says erhard wienkamp, managing director of messe düsseldorf, visibly pleased as he takes stock of the past days.

46,000 visitors (with an international share of 73 percent) from 150 countries seized the opportunity to engage in person with the 3,033 medica and 490 compamed exhibitors in düsseldorf, obtaining information on the comprehensive range of innovations for outpatient and inpatient care, including every step of their development and manufacture, and trying out many innovative products live in the trade fair halls.

“The numbers are encouraging, and were hardly expected to be at this level in spring. With the combination of trade fair events and digital supplements, medica and compamed have given the industry strong stimuli. The exhibitors are happy to have come to düsseldorf and are already actively inquiring about options to take part next year,” says christian grosser, director health & medical technologies at messe düsseldorf, thus reflecting the positive signals fed back by participants and trade associations alike.

The industry portals medica.De and compamed.De added a range of offers in line with the live events at the trade fairs. This allowed users to access livestreams to watch the stage programmes of all expert forums that had been integrated into the trade fairs as well as the 44th german hospital conference and the medica medicine + sports conference; network via the special matchmaking tool; and obtain information on innovative products in the exhibitors’ online showrooms.

Growth despite challenges provides plenty to talk about

Despite continuing restrictions in international transport, germany’s association for electromedical technology (zvei) has predicted a growth of eight percent for the global electromedical technology market in the current year. “as a hybrid in-person event, medica has given exhibitors and visitors a vital platform to discuss innovative medical products and current trends in the field of medical technology, both face-to-face and online. In doing so, the fair supports exhibitors in their work on european and international markets,” explains hans-peter bursig, managing director of the electromedical technology trade association at zvei.

Marcus kuhlmann, head of medical technology at german industry association spectaris, also highlights the importance of medica and compamed when it comes to exports and close business ties to other countries. “in order to shape the health market of tomorrow together, with innovative ideas and concepts, we need a strong industry network within the medical technology sector. Personal dialogue remains irreplaceable, even in this era of digital transformation, and our members had really looked forward to it after a pandemic that has now lasted more than one and a half years. We were therefore even more delighted than usual to attend medica and compamed in person in düsseldorf this year, and obtain new stimuli for the medical technology industry.”

Together with zvei, spectaris organised the medica tech forum (in hall 9 and as a livestream), which dealt with questions around international market access and regulatory requirements for medical technology. Here, the forum focused in particular on the national markets in africa, the usa and the united kingdom as well as the russian healthcare system’s specific digitisation needs, for example in the context of the coronavirus pandemic.

The industry furthermore currently faces one issue that is extremely challenging and was accordingly much discussed and showed a need for additional information, not just among forum participants but throughout the halls of medica and compamed: the application of the new eu medical device regulation (mdr). “in principle, it is appropriate and essential to regulate medical technology, as this guarantees an extremely high level of patient and user safety across the board. But we need to critically question any regulations that do not sufficiently contribute to an increase in safety and retract them if necessary. If we don’t, we weaken europe’s position as a research and innovation location,” says marcus kuhlman of spectaris.

Digital care of tomorrow – start-ups heavily involved

As expected, covid-19 and the findings gained to date while managing the pandemic with regard to the implementation of new therapeutic approaches and care concepts were recurring themes in many talks at the forums and accompanying conferences. The medica medicine + sports conference, for example, took a closer look at how to get back into sports after suffering from long covid, while the medica econ forum (organised by german health insurance company techniker krankenkasse) and the medica health it forum focused on digitising processes in the healthcare system.

In line with these themes, exhibitors offered many innovations for the clinical and outpatient field. And the young start-up scene was heavily involved as well, something that was impressively proven during the thrilling pitch competitions held as part of the 10th medica startup competition and the 13th healthcare innovation world cup, which took place on the medica connected healthcare forum programme stage.

The 13th healthcare innovation world cup focused on innovative devices and smart applications for digital networking and process integration, with an eye to the internet of medical things. From among 300 entries, the jury selected 12 start-ups for the finals on 15 november. Germany-based implandata ophthalmic products took first place with an implanted and biocompatible microsensor for use in glaucoma telecare.

Ideas ranged from artificial intelligence (ai) and health apps to robotics at the 10th medica startup competition (on 16 november). Here, finland-based phonolyser made it through the finals and took first place with its eponymous product solution, a smart heart sound analyser. The analyser combines artificial intelligence (processing and analysing signals), doppler technology (ultrasound) and sound analysis to comprehensively assess and examine congenital heart defects.

Suppliers: a host of topics on the agenda, a host of innovations on board

Trends along the entire process chain of medical technological manufacture and product developments dominated both the trade fair business of exhibitors and visitors at compamed (which took place in halls 13 and 14 this time around) and the stage programmes of the two integrated expert forums. Innovative substances played just as great a role as printed electronics, smart sensor solutions and microfluidic options to resolve challenges in point of care diagnostics.

“Compamed 2021 was a great success for the exhibitors. The feedback on our joint stand was excellent; because of the pandemic, some of the exhibiting companies had subdued expectations, and were pleasantly surprised by the excellent visitor numbers. Many of them also praised the outstanding quality of the visitors,” says dr thomas r. Dietrich, executive director of the ivam international microtechnology business network, visibly pleased as he sums up events at the trade fair.

With its joint stand, ivam once again was one of the largest exhibitors at compamed. 42 companies and institutes from nine countries were represented at this fair alone, presenting a range of innovations that included various microcomponents, solutions for smart textiles and coatings as well as manufacturing and processing methods.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

Tools to Build a Better Planet

Tools to Build a Better Planet

Black+Decker a Stanley Black & Decker brand setting the standard for innovation and design of power tools, outdoor yard care equipment and home products, announced the retail launch of the first phase of the reviva power tool line. The reviva tool line was designed for Diyers to complete an array of do-it-yourself (DIY) projects. The new line up is geared towards the eco-conscious consumer, as each tool’s housing is manufactured from 50% recycled material. The reviva drill driver, detail sander, jigsaw and screwdriver are available for purchase on Amazon.com and at additional retailers.

“With the launch of the reviva product line, Black+Decker has taken the next step in its sustainability journey,” said Debi Geyer, Corporate Responsibility Officer at Stanley Black & Decker. “Within three years, the weight of more than 10 million single-use plastic bottles are forecast to be diverted from oceans and landfills to manufacture the reviva line – a first of its kind for Black+Decker, these revolutionary products are designed to meet the needs of a new generation of eco-conscious consumers.”

Each reviva product is created in partnership with Eastman and the tool’s housing is engineered for durability, made from Tritan Renew, a 50% certified recycled material. In addition to its tool housing composition, every tool in the reviva family of products is delivered in packaging designed to be curbside recyclable which doubles as a storage box. Through a partnership with TerraCycle, Stanley Black & Decker is now offering consumers the opportunity to recycle products, like the reviva line, at the end of the product’s usable life cycle.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

Registrations for Medica 2022 and Compamed 2022 Exceed Previous Year’s Level

Registrations for Medica 2022 and Compamed 2022 Exceed Previous Year’s Level

Medical technology industry needs strong platforms while current challenges continue

The planning for the world’s leading medical trade fair medica 2022 (14 – 17 november) in düsseldorf and the parallel no. 1 trade fair for the supplier sector of the medical technology industry, compamed 2022, is gathering momentum. The current course of exhibitor registrations indicates that participation will be above the previous year’s level, both in terms of booked space and the number of participations (medica 2021: 3033 participations, compamed 2021: 490).

The medical technology industry right now needs the medica and compamed as strong platforms for international exchange, joint ventures and business. Because the market is in flux. In certain areas, the pandemic is causing increases in demand, for example in point-of-care diagnostics. Apart from that, companies are seeing an increasing necessity to work jointly with their partners in supply and manufacturing to ensure delivery capacity during a time where prices increase dramatically and construction parts are becoming sparse.”, says christian grosser, director health & medical technologies at messe düsseldorf, important reasons to participate in both leading business events. “International networking also helps to open new markets. You can broaden the base for your own business, while alleviating the effects of obstacles, insecurities or even sanctions that may apply to certain national markets.”, christian grosser adds.

New business entrepreneurs gain easy access

When it comes to reacting to challenges and seizing new opportunities that arise, start-ups from all countries have always been exceptionally quick to action. For years, they have been present in large numbers at the medica and compamed, both with their own booths and with joint booths. “Especially for first-time exhibitors, our medica start-up park offers an attractive opportunity for participation – optionally available with a speaking slot at the always well-attended medica connected healthcare forum”, dr claudio bucchi points out, who as a senior project manager and trend scout at messe düsseldorf has already assisted many start-ups with their first time at medica.

One of them is the young company dermanostic, which offers remote medical consultations with doctors for diseases of the skin through an app and by using patient-provided photographs of the affected areas. (click here for a medica video report on the start-up dermanostic.) dr patrick lang, the founder of dermanostic, already participated in the medica start-up park in 2021, and is excited to look forward: “We were very pleased with the medica start-up park. We not only had the opportunity to exchange ideas with other start-ups, we also gained many international contacts, and received direct feedback from a professional audience that tried out our app. We are excited to find out what will develop from this until the medica 2022.”

Other than sharing a booth, this year start-ups and scale-ups (companies entering their next level of development) will again offer interesting insights into their current projects through a variety of pitch and presentation formats. Examples are the medica disrupt sessions, the 11th medica start-up competition, or the 14th healthcare innovation world cup, all highlights of the programme at the medica connected healthcare forum. All in all, at least 120 speakers and more than 100 start-ups will be part of the action when it comes to digital innovations for the future’s mobile, connective health care.

Formats that fit together: trade fair, forums and conferences

Other forums are integrated into the individual sections of trade fair topics, and frame discussion content within the larger context of new products and best practices within day-to-day medical care. Aside from the medica connected healthcare forum, special mention goes to the medical health it forum, the medica tech forum, the medica labmed forum and the medica econ forum, initiated by messe düsseldorf in cooperation with german health insurance company techniker krankenkasse (tk).

Focal points of the medica trade fair include: lab technology and diagnostics, medical technology and medical electronics (imaging and diagnostic/ medical equipment and devices), supplies and consumables, physiotherapy and orthopaedic technology, as well as it systems and it solutions.

Medica’s conference programme also ensures a content-related connection to the trending topics on the market and at the trade fair. An example is the 45th german hospital day, a leading event for the top management of german hospitals, which this year will be held face-to-face again. Two other (english language) conferences address a mainly international, professional audience: the conference on disaster and military medicine dimimed, and the medica medicine + sports conference for the international professional sports medicine and sports science scene.

Don’t miss out on trend updates for suppliers

If you want to stay on top of the trends that affect the preliminary development phases or manufacturing steps in medical technology, do not forget to note down the compamed in your calendar. This is where supplier companies present a cornucopia of high-tech and service solutions. Components, microsystem technology, material processing and coating, additive manufacturing/ 3d printing, manufacturing engineering and machines as well as packaging and services are focal points that are reflected in the programmes of both integrated forums: topics for the compamed high-tech forum are chosen by the ivam microtechnology network, those for the compamed suppliers forum by the professional publication devicemed.

There continues to be an unrelenting demand for micro components and procedures within the context of digitalisation and patient-centred diagnostics as they are the key to ultra-precise manufacturing and the foundation for light-weight, portable and interconnected devices. “The trend is clearly toward miniaturisation and comprehensive solutions,” confirms ralf friedrich, sales engineer at camozzi automation gmbh. Camozzi has been participating in the compamed since 2013, and uses the event as a platform for international contacts. The company is active world-wide, and specialises in the development and production of components, systems and technologies within drive and fluid technologies, which among other things are used in medical laboratory devices.

This globally unique combination means that both medica 2022 and compamed 2022 will again reflect the entire medical technology value and process chains and present a comprehensive range of medical products, devices and instruments. In 2021, both events had a total of 46,000 professional visitors (73 percent international).

The industry portals medica.De and compamed.De offer an additional wealth of digital services for preparing and planning an effective on-site presence (e.G. Interactive floor plans), for networking with companies, as well as for staying on top of current industry trends and novelties in the world of medical technology and its dynamic development.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

Fascinating Presentations at the Compamed Innovation Forum 2022: How Medical Technology Combats Neurological Disorders

Fascinating Presentations at the Compamed Innovation Forum 2022: How Medical Technology Combats Neurological Disorders

When man and machine become one – an overview of some of the current developments

For years, Messe Düsseldorf and the IVAM Microtechnology Network have been the joint hosts of the Compamed Innovation Forum. Each spring, with a different content focal point each year, there is a first look at the topics for the coming season of the internationally leading expert trade fair for suppliers of the medical technology industry, Compamed in Düsseldorf, which will be held this year from November 14 to 17, in parallel with the globally leading medical trade fair Medica. The 2022 Compamed Innovation Forum which is dedicated to “Innovative technology for neurological applications” was held virtually on June 2.

Presentations were focused on current products and their applications, some of which are still in the research and development phase, and some are already being put to use. In addition to implants, technical aids which are used to care for and assist people affected by neurological disorders play an important role. Addressing the participants of the forum, Christian Bigge, Senior Project Manager for Compamed at Messe Düsseldorf, was happy to pass on two messages: “We are planning for the event to happen in-person again and continue its success, enhanced by numerous digital services. Halls 8a and 8b, reserved for Compamed, will be completely booked out.”

Neurological and psychiatric disorders of the brain are not a rare phenomenon, but their frequency and their effects are still underestimated. These disorders affect the lives of many people and their families. According to an estimate by the Who, a billion patients worldwide suffer from disorders of the central nervous system (CNS), such as depression, dementia, epilepsy, Parkinson’s, or the sequelae of a stroke. Treatment cannot solely consist of relying on medication alone. Innovative medical technology can also improve the quality of life of those affected. Unlike medication, which helps to regulate the chemical balance within the human body, neurological implants target the electrical neural pathways within the spinal cord and brain.

Advances in brain-computer interfaces

One important field of research for the Clinical Neurotechnology research section at the Charité university hospital in Berlin is the use of brain-computer or brain-machine interfaces (BCI/BMI) in combination with non-invasive brain stimulation methods, such as transcranial electric or magnetic stimulation (TES/TMS). Professor Surjo R. Soekadar, head of the Clinical Neurotechnology research section and head of the clinical department of Translation and Neurotechnology at Charité, reported on the current level of technological advancement. In 1999, Professor Nils Birbaumer had already proven that fully paralysed patients – without the ability to move or speak – could, by changing the electric activity in the brain, select individual letters on a screen and thus write a complete message. This approach has made enormous developmental progress over recent years, thanks to more powerful, faster computers and the increase in their memory capacities, as well as due to the use of artificial intelligence (AI) and machine learning.

The Professor Soekodar’s research section, for example, focuses on the examination of neuroplasticity in the context of BCI applications. Here, BCI systems are combined with other forms of neurological technology, e.g. non-invasive brain stimulation. Brain stimulation techniques have been used in a clinical environment for decades, in order to effect targeted changes in brain activity and thus promote neuroplasticity. The goal of combining both methods is to better understand and influence neuroplastic processes. This approach aims to yield new and effective therapeutic methods that offer individual treatment of disorders of the CNS with as few side effects as possible. Development over the recent years has proven that assistive and regenerative BCIs are effective clinical instruments for regaining movement. The combination of BCI and neurological modulation, or non-invasive brain stimulation, can in this case illuminate the causal relationship between brain waves, brain function and behaviour. The path forward is also clear: “Right now, quantum sensors are the most promising technology for advancing non-invasive BCI applications. However, there are still some challenges that need to be overcome, such as shielding and isolation,” says Soekadar, speaking as an expert at the Compamed Innovation Forum.

Brain Interchange platform technology

A platform technology for a brain interchange system for neurological therapy has been developed by CorTec, in cooperation with clinical partners. The focus is on components and devices that can be used by industry, scientists and clinical professionals alike. The BIC consists of all components necessary to achieve an electric connection between the neuronal system and external information technology. The exchange of information is performed to modulate the nervous system. The completely implantable system is calibrated for both recording and stimulation using 32 channels. It is intended for long-term monitoring and electrical stimulation of the central and the peripheral nervous system. The CorTec Brain Interchange receives electric signals from electrodes attached to the nervous system, and reinforces, digitalises and transmits these signals to a computing unit through an external unit. “Data processing takes place outside the body,” explains Dr Martin Schüttler, CTO of CorTec.

The company has announced further developmental progress. For example, preclinical trials and developmental milestones have recently been successfully concluded. During the next phases, the technology is to be fine-tuned and ultimately prepared for the first-in-human studies. The American bureau of regulations for medical products, the FDA, is currently looking into approving the brain interchange platform technology. The spectrum of possible applications is large, for example if a range of differently designed electrodes are used, and ranges from applications for Parkinson’s and epilepsy to treating chronic pain and movement disorders, which can result from major strokes, injuries to the spinal cord or progressive muscular dystrophy (ALS).

New mobility through brain waves and use of exoskeletons

The French company Statice is a developer and contract manufacturer focusing on specific solutions in microtechnology and medical technology, including neurology. Injuries to the spinal cord above cervical vertebra C8 carry a large risk of the patient becoming tetraplegic and being unable to use their arms and hands. Statice is aiming to restore mobility in such cases by combining the interpretation of brain waves with an exoskeleton. Towards the end of 2019, the medical journal “The Lancet” published results from the clinical study of a BCI project, in which French scientists from the CEA research centre and Statice have proven the feasibility of control of an exoskeleton for tetraplegics. Wimagine neurological prosthetics play a crucial role. These are long-term implants placed on the dura mater, which record brain activity. The implantable matrix consists of 64 electrodes.

In September 2021, two patients with a C5 lesion of the spinal cord received such implants. To determine the stability of the signal during implantation, special metrics were used to evaluate the signal. The time-frequency charts obtained from task-focused instances of motor activation were also evaluated to monitor the long term activity of the electrodes. “It was possible to prove the long term functionality of the Wimagine implants for chronic implantation. With the help of up-to-date tools for signal analysis, we can record good stability of ECoG signals for each patient, which looks promising for clinical examination with epidural recordings.” says Benoit Studlé, CEO of Statice, summarising the results. These are to be confirmed in further patients. The next step follows naturally: a wireless bypass of the damaged spinal cord for paraplegics. The impulses of motor intention transmitted by the brain are to be deciphered via Wimagine and then translated to impulses sent directly to the nerves that control the legs, for example.

Materials for implants and neurostimulation

Highly specialised devices and systems used in medical technology always need better and more highly functional materials. One supplier of such solutions is Sandvik. The company has a Medicine business unit, which focuses specifically on delivering materials for the cardiovascular, neurostimulation, remote monitoring and electronics fields. For example, Sandvik manufactures coated stainless steel fine wiring for the electrode arrangement, as well as cable and coil configuration for transmitting signals, and ball electrodes in hearing implants (cochlea). They are also working on is deep brain stimulation (DBS). This is a neurosurgical procedure which implants a neurostimulator to treat movement and neuropsychiatric disorders. “To stimulate nerves, we produce wires made of a platinum-iridium alloy and high quality conductive wires with a prolonged operating life,” explains Dr Cacie McDorman, Process Engineer Manager at Sandvik Materials Technology.

Order components the size of a grain of sand

For 40 years, Valtronic has been a global full service licensed manufacturer of electronic products with a wealth of experience in ready-to-use production, microelectronic assemblies and miniaturisation. “Active implantable medical products are a challenge, from the design to manufacturing; just imagine the extreme miniaturisation, for example our DBS probes with a length of only 400 mm and a diameter of just 1.3 mm,” says Michael Fink, Consultant Business Development at Valtronic. Another example of this trend is the development of a thumb-sized device that sends programmable electric impulses to patients suffering from chronic pain, urinary incontinence and functional disorders of the limbs. The solution consists of minimised circuit complexity, and components reduced to the size of a grain of sand.

Mobile seizure detectors for recognising epilepsy

Epilepsy is a collective term for a group of functional disorders of the brain, which arise from the interaction of pathological excitation and lack of inhibition of excitation in the neuronal clusters of the CNS. Between 2 and 4 percent of all people suffer a single, isolated epileptic seizure. Between 0.5 and 1 percent develop manifest epilepsy, meaning that they have more than one seizure. Epilepsy is therefore one of the most common neurological disorders, affecting around 50 million people worldwide, with 800,000 in Germany alone. This considered, the Centre for Epileptology at the neurological clinic at the University Hospital of RWTH Aachen is researching seizure detection devices for affected patients. “The risks for epileptic patients are injuries, early death and damage to neurons, including the development of cognitive deficits over time,” says Prof Yvonne Weber, head of the epileptology section at the neurological clinic. Quite often, these risks lead to a lack of integration into social and working life, as well as to stigmatisation.

EEGs have been used to detect epileptic seizures up until this point. However, in recent years, the heart rate, which is increased in 60 to 70 percent of all cases, the variability of the heart rate, and also oxygen saturation and respiration levels have provided new measurands to detect epilepsy. In the Monikit (“monitoring kit”) project, the University Hospital of the RWTH Aachen, the Kleinwachau Centre for Epilepsy and the University Hospital of Tübingen University are developing a mobile seizure detection device for automatic detection and documentation of epileptic seizures that occur during daily activities. The comprehensive monikit system consists of a sensor array and an innovative algorithm. The sensor device is attached to the chest with adhesive electrodes or by belt, and picks up ECG and motion data. These data form the basis for the monikit algorithm and are transmitted to the patients’ mobile phone. “The small size of the sensor allows it to be worn underneath clothing. It has to be removed before taking a shower, though,” says Weber. The monikit algorithm recognises special patterns of both generalised and focal epileptic seizures from the ECG and motion data. This is made possible by machine learning methods, for example neuronal networks, which are trained on thousands of hours of patient data, which enables them to detect new digital biomarkers. The algorithm can differentiate between epileptic seizures and every day activities, like sports or stress. The monikit app automatically documents and evaluates any detected seizures. The app also sends messages in the event of a seizure, determines access rights, and collects statistical data about seizures.

Thus, doctors involved in treatment receive adequate and objective information about seizures during patients’ everyday activities for the first time. This makes optimum adjustment of the therapy possible. Once doctors have been legitimised and given access by the patient, they receive insight into seizure information through their internet browser, including evaluations of the course, type of seizure and other information – secured and encrypted according to standards. The project receives 1.86 m Euro in funding from the German Federal Ministry of Education and Research (BMBF), through the operating company Life Science Inkubator GmbH.

The market for neurostimulation is growing by more than 10 percent per year

There can be no doubt that the possibilities and possible applications for neurostimulation are increasing. According to findings by Allied Market Research, the global market volume for corresponding systems was estimated at around 4.4 billion US dollar in 2018, and is expected to expand to approximately 11.3 billion US dollar by 2026. This corresponds to annual growth of 12.5 percent. Factors such as an increase in lifestyle diseases like depression and chronic pain, the growing number of neurological disorders, and investments in neuroscience and neuroscientific development are regarded as the drivers behind the growth. Other factors are the rising demand for minimally invasive surgery, the introduction of technologically advanced products and the rising age of populations, which makes them more susceptible to neurological disorders like epilepsy, Parkinson’s, Alzheimer’s and chronic pain. According to statements by GlobeTech, neurological applications account for approximately 24 percent of the total market for active implantable medical devices (AIMD). The largest segment belongs to spinal cord stimulators (SCS) with a 35 percent share in the market, followed by inner and middle ear stimulators (cochlear and BAHA) with 21 percent, deep brain stimulators (DBS) with 14 percent and sacral nerve stimulators (SNS) with just under 10 percent.

Compamed: The most important industry meet-up is back, live in Düsseldorf

The technological progress in combating neurological disorders is quite remarkable, as proven by the Compamed Innovation Forum 2022. More advanced products from the innovation-driven supplier industry for medical technology will be presented at Compamed 2022, which will take place in mid-November again, in halls 8a and 8b of the Düsseldorf trade fair centre. The main themes will be: Micro and micro system technology, new materials, processing them and functional surfaces, additive manufacturing/3D printing, manufacturing and packaging as well as a wide range of services. These themes also provide the content framework for the two integrated expert forums: the Compamed High-Tech Forum by the IVAM Microtechnology Network and the Compamed Suppliers Forum by the Devicemed professional medium.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry

The New Exhibitor Profile Enables Companies to Improve Their Digital Presence as They Participate in Medica

The New Exhibitor Profile Enables Companies to Improve Their Digital Presence as They Participate in Medica

A premier for Medica Deep Dive: Expert knowledge in a compact online format

When Medica, the world’s leading medical trade fair, opens its doors again in the middle of November in Düsseldorf, an expert audience from the healthcare industry will already be ideally prepared thanks to digital information offers in advance. To kick off our 2022 autumn events with the Caravan Salon at the end of August, for exaple, Messe Düsseldorf has provided an optimised digital service in the form of the new exhibitor profile, which will also be implemented for Medica and the supplier trade fair held in parallel with it, Compamed (date: 14 – 17 November 2022). The exhibitor profile is at the heart of the exhibiting companies’ digital trade fair presence, and is thus an important tool for companies that want to be found by (potential) customers, both digitally and on-site in the trade fair halls. Another benefit is the strong reach of the trade fair portal. The relaunch of the exhibitor profiles was rolled out from the middle of July across all Messe Düsseldorf online portals.

“Companies need to present themselves and their products to their best advantage, both live at the trade fair and online. The new exhibitor profile enables them to do this”, explains Wolfram N. Diener, CEO of Messe Düsseldorf. “We have reinvested in platforms that we can provide to our customers both in-person and digitally. Our trade fairs are open 365 days a year on our online portals. They form the first point of contact for their relevant sectors. In order to provide our customers with the greatest level of benefit, we maintain a regular exchange and continue the development our digital services, such as the online portals.

The modern, clean design of the exhibitor profile has been revamped and has now been further optimised for mobile devices. Those who visit the databases can filter the offers listed there according to their personal interests. This means that companies, their products, trade fair events and company news can be found simply and quickly. Now, it is also easier to contact companies and create personalised favourite lists at the click of a button, enabling visitors to prepare for the trade fair with very little effort.

Digital discussion circles as warm up act for our headliners

The Medica Deep Dive digital discussion circles, held in English, have been conceived as a warm-up, so that content for trade fair participation can be prepped in a purposeful manner. These discussion circles will begin soon. With regard to the duration of the Medica trade fair, they bring particularly relevant trending topics from the healthcare sector into focus. It all starts on 22 September, with “Diagnostics for infectious diseases”, in which current innovations and developments in point-of-care diagnostics are among the central topics. The topics of “Artificial Intelligence/big data in a medical setting” (13.10) and “The smart hospital” (03.11) follow soon afterwards. The moderated online discussion circles concisely present cutting-edge expert knowledge from the industry, clinical practice and science live in 45 minute segments and can be streamed on the industry portal, Medica.de Bookings have increased compared to last year

The trend for exhibitor bookings suggests that participation in both Medica 2022 and in Compamed 2022, the international leading trade fair for the supplier sector for the medical technology industry, held in parallel, is set to rise above the level for the previous year (Medica 2021: 3033 participants, Compamed 2021: 490)

Focal points of the Medica trade fair include: Lab technology and diagnostics, medical technology and medical electronics (imaging and diagnostic/ medical equipment and devices), supplies and consumables, physiotherapy and orthopaedic technology, as well as IT systems and IT solutions.

The 45th German Hospital Conference is the leading event for top management of German clinics in a star-studded programme, which includes the DiMiMED Conference on Disaster and Military Medicine for an international professional audience and the Medica Medicine + Sports Confrence for the global specialist scene revolving around sports medicine and sports science.

New Hepa filters for the highest quality air

Along with well-developed programme planning, technical equipment also ensures the best conditions for Medica 2022 and Compamed 2022. In the first half of 2022, the entire Düsseldorf trade fair and congress centre was fitted with Hepa filters. These are currently the most effective form of air treatment technology and are also used in operating theatres and intensive care wards. Hepa filters remove 99.9% of the viruses, bacteria and other particles from the air. The purified air is then fed back into the room. “In combination with high-performance air conditioning systems, the filters in our huge halls ensure that our guests can attend the trade fair with a sense of security”, explains Christian Grosser, Director Healthcare & Medical Technologies of Messe Düsseldorf.

 

#modernplasticsindia #plasticmagazine #indianmagazine #indianplasticmagazine #modernplasticsaward #ginujoseph #modernplastic #plasticindia #plasticnews #plasticrecycling #modernplasticsglobalnetwork #modernglobalnetwok #modernplasticsaward2022 #PlasticIndustry